Sinometer HP9810 Automotive Digital Multimeter with Thermometer
The Sinometer HP9810 is an automotive tester and digital multimeter combined in one, it can measure AC/DC voltage, DC current, resistance, temperature in both celsius and fahrenheit, as well as diode check and continuity test. For automotive testing, you can use it to measure dwell angle and RPM up to 10,000.
- All-around meter designed for automotive testing, trouble-shooting & household electrical problems
- AC/DC Voltage + DC Amp + Resistance + Temperature + Diode + Continuity + Tachometer + Dwell Angle
- Dwell angle & tachometer measurement, number of cyclinders selectable, 4/6/8
- Measure temperature up to 1,800 F
What's in the Box:
- HP9810 Automotive tester
- Test leads with alligator clips
- Thermo probe
- 9V battery (installed)
- User manual
- Carrying bag
Specifications:
DC Voltage: 200 mV, 2V, 20V, 200V, ±(0.5% + 5) 1000V ±(1.5% + 8)
AC Voltage: 200 mV, ±(2.0% + 10) 2V, 20V, 200V at 40 to 400Hz ±(1.5% + 10), 750V at 40 to 200Hz ±(2.5% + 10)
DC Current: 20A ± (2.0% + 10)
Resistance: 200 ohm ±(1.2% + 5) 2K ohm, 20K ohm, 200K ohm, 2M ohm ±(1.2%+5),20M ohm ±(2.5% + 15), 200M ohm ± (5.0% + 30)
Temperature:
(-40 to 1000) degrees C ± (0.75% of reading + 3 digits) < 400 degrees C, ± (1.5% of reading + 15 digits) ≥ 400 degrees C
(0 to 1800) degrees F ± (0.75% of reading + 3 digits) < 750 degrees F, ± (1.5% of reading + 15 digits) ≥ 750 degrees C
Diode Test
Continuity Test: Audible indication: less than 80 ohms approx.
Tachometer:500 to 10,000 RPM ± (1.5% + 8)
Dwell: 3, 4, 5, 6, and 8 Cylinder ± (1.5% + 8)
Transistor hFE test
Features:
Temperature in Degrees C or F
Manual Range Control
Automatic Negative Polarity Indication
Automatic Zero Adjustment
Data Hold
Back Light
Low Battery Indicator
Over Range "1" Display